The same spindle we use for our 80 series tire carrier. This is an incredibly stout bearing and spindle designed for making your own spare tire carrier. It comes with a 1.5" diameter inner shaft, machined down to fit the included roller bearings. The outer piece is 2-1/4" OD and is machined on the inside to fit the bearings and seals perfectly. It can be mounted vertically, horizontally, or at any angle you want for your custom setup.
They come complete with Bearings, Races, Seals, & Bearing Cap. This spindle is rated at 1.25k lbs in a stationary position (keep leverage in mind and the increased force that a long swing out can put on the spindle). When designing your bumper be sure there is adequate support at the latch side of your swing out when closed as the vibrations and movement while driving can fatigue the spindle over time. In addition to the spindle welded in at the top of the bumper, be sure the bottom of your spindle is also supported and welded in your design.